DSC 1832

General Discussion

DSC 1832

Postby moosecroc » Sat Sep 08, 2018 11:47 am

The alarm decoder doesn't seem to play very well with the DSC 1832 panel

Issues are:
1) The keypad module doesn't show the message on the keypad. You have to go to the log to see that
2) The deduplicate option in setup alarm decoder doesn't make any difference- the log remains full of duplicate messages which can make it very difficult to use
3) The keypad doesn't emulate the <> keys that DSC needs to scroll through some of the menus
4) The log Tab only seems to accept 0-9 , * and # so you cant scroll through there either

I was hoping to use this to troubleshoot a remote alarm system but with the limitations above it is not a great deal of use- what can be done to implement the <> keys please (and ideally get the "Dot Matrix" emulation working)
moosecroc
newt
newt
 
Posts: 1
Joined: Sun Oct 29, 2017 8:43 am

Re: DSC 1832

Postby kevin » Sat Sep 08, 2018 3:44 pm

make sure you've got the latest firmware and webapp and library softwares installed - if you continue to have trouble, email support
Not an employee of the company. Just here to help and keep things clean.
kevin
Platinum Nut
Platinum Nut
 
Posts: 994
Joined: Fri Aug 16, 2013 10:10 am


Return to General

Who is online

Users browsing this forum: No registered users and 3 guests

cron