Page 3 of 6
Re: Homebridge Plugin
Posted:
Fri Jan 12, 2018 8:35 pm
by tommyd75
Shaun, Have you had any time to check on this?
Sent from my iPhone using Tapatalk
Re: Homebridge Plugin
Posted:
Sat Jan 13, 2018 10:34 pm
by ideal_
Quick question - the config.json, what is the port? (to listen on).. I tried the port that ser2sock is on and homebridge throws an exception (address in use)
Re: Homebridge Plugin
Posted:
Sun Jan 14, 2018 9:41 pm
by tommyd75
ideal_ wrote:Quick question - the config.json, what is the port? (to listen on).. I tried the port that ser2sock is on and homebridge throws an exception (address in use)
Use whatever port you set up in the webpage on the Ad2Pi when you created the notifications.
I’m using port 5001 in my config file.
Sent from my iPhone using Tapatalk
Re: Homebridge Plugin
Posted:
Tue Jan 16, 2018 6:28 pm
by aficustree
Sorry, for some reason it didn't email me like it usually does. Feel free to use the GitHub issues tracker as I tend to be on GitHub way more frequently. Anyways, I apologize but I don't quite understand what AlarmDecoder is doing here. Looking at the logs it looks like zone 5 and 6 are faulted while it's reporting that 026 is in alarm on the text log. Then once you clear it, suddenly its now reporting 26 as faulted. The code as-written assumes that alarmdecoder would report it as a faulted zone. I think this is actually an issue with alarm decoders library or I'm making an invalid assumption. Is anyone from the alarmdecoder watching that could comment on what the expected behavior should be? Do i need to parse the text string to pick up smoke/fire alarms, if so, what's the point of passing it as a faulted zone only after it's cleared (and even then, what looks to be only momentarily)?
Also, could you double check to make sure your webUI libraries are updated? I can't test as my system doesn't have the fire/carbon system wired into it (indeed i have no idea where those cables are; a project for another day)
Re: Homebridge Plugin
Posted:
Tue Jan 16, 2018 6:33 pm
by aficustree
also i was thinking about whether i should add a light-switch to emulate the panic button. That way if you have some sort of homekit enabled security thing, it could function as a defacto extension of the honeywell/DSC system without actually having to wire them together. If magic thing X does Y then turn panic ON. Any interest?
Re: Homebridge Plugin
Posted:
Sat Jan 20, 2018 7:25 pm
by tommyd75
Aficustree,
Sure, I’d be interested in trying out the panic thing.
Also are you talking about updating the web app when you say webUI libraries?
I have updated recently but I will check again for any updates.
Sent from my iPhone using Tapatalk
Re: Homebridge Plugin
Posted:
Mon Jun 18, 2018 6:13 am
by djstiky
I just set up my homebridge on a Raspberry Pi 3 and it works great for the plugins I've installed so far.
However, if I try to install homebridge-alarmdecoder-platform like follows, I get a error:
sudo npm install -g
git+https://github.com/aficustree/homeb ... orm#masterERR! Command failed: /usr/bin/git clone --depth=1 -q -b master
https://github.com/aficustree/homebridg ... atform.git /root/.npm/_cacache/tmp/git-clone-0e95fd69 npm
ERR! fatal: could not create leading directories of '/root/.npm/_cacache/tmp/git-clone-0e95fd69': Permission denied
Can anyone help?
Re: Homebridge Plugin
Posted:
Mon Jun 18, 2018 6:18 am
by aficustree
try adding
- Code: Select all
--unsafe-perm
after
- Code: Select all
-g
Re: Homebridge Plugin
Posted:
Mon Jun 18, 2018 6:27 am
by djstiky
Just tried it and got this:
sudo npm install -g --unsafe-perm
git+https://github.com/aficustree/homeb ... orm#masternpm ERR! code 128
npm ERR! Command failed: /usr/bin/git clone --depth=1 -q -b master
https://github.com/aficustree/homebridg ... atform.git /root/.npm/_cacache/tmp/git-clone-459d7e95
npm ERR! fatal: could not create leading directories of '/root/.npm/_cacache/tmp/git-clone-459d7e95': Permission denied
npm ERR!
npm ERR! A complete log of this run can be found in:
npm ERR! /root/.npm/_logs/2018-06-18T14_30_34_506Z-debug.log
Re: Homebridge Plugin
Posted:
Mon Jun 18, 2018 6:57 am
by aficustree
npm seems to break when looking at it funny, i just synced the repo with nom's version, try it directly
- Code: Select all
sudo npm install -g homebridge-alarmdecoder-platform