Arm Stay Instant for Ademco panels with SmartThings

Contribute source code here. Anything not accompanied by source code will be removed.

Arm Stay Instant for Ademco panels with SmartThings

Postby cw733 » Wed Sep 18, 2019 4:22 pm

I have modified the SmartThings code to allow users to arm Ademco panels to Stay "Instant," which disables the entry delay. We use this for our home at night.

What's included:

AlarmDecoder UI has an extra button, for Stay Instant.
IMG_0187.PNG
IMG_0187.PNG (199.85 KiB) Viewed 11061 times


The AlarmDecoder Service has an extra configuration page that allows you to select if you want a "Normal" stay or an "Instant" stay when you arm to Stay via SHM.
IMG_0188.PNG
IMG_0188.PNG (179.8 KiB) Viewed 11061 times


Stay Instant push device and Stay Instant Status device are created. In my case, arming Stay via SHM is setup to do a "Normal" stay, but my Bedtime routine sets Stay Instant by pushing the Stay Instant button/device.
IMG_0189.PNG
IMG_0189.PNG (209.83 KiB) Viewed 11061 times


If there is any interest in this, I could possibly expand it to include Night and Maximum modes. I don't know if these modes exist for DSC panels or what the keys would be. If they do, it could possibly be expanded to DSC panels.

Modified code is branched/forked here:

https://github.com/Cw733/alarmdecoder-smartthings/tree/cw733dev

Hope this is useful to someone.

Casey
cw733
newt
newt
 
Posts: 1
Joined: Tue Sep 17, 2019 10:36 am

Return to Code Contributions

Who is online

Users browsing this forum: No registered users and 5 guests

cron