Help Troubleshooting AD2Pi

General Discussion

Re: Help Troubleshooting AD2Pi

Postby jasonsf » Sat Jun 09, 2018 3:44 pm

Taking a closer look, it appears the DO and DI were switched. Changing that did not have any immediate results so I'm trying to flash the firmware. Unfortunately, not getting very far with that. It seems to hang and never get anywhere after displaying the following:

Code: Select all
pi@alarmdecoder:~ $ sudo /opt/alarmdecoder/bin/ad2-firmwareupload ~/ademcoemu_V2-2a-8-8.hex /dev/ttyAMA0 115200
Flashing device: /dev/ttyAMA0 - 115200 baud
Firmware: /home/pi/ademcoemu_V2-2a-8-8.hex
jasonsf
Senior Nut
Senior Nut
 
Posts: 60
Joined: Sun Oct 16, 2016 2:43 pm

Re: Help Troubleshooting AD2Pi

Postby jasonsf » Sun Jun 10, 2018 8:12 pm

Kevin, just wanted to follow up. I found that the ad2pi board was not securely attached to the raspberry pi GPIO pins. That's what caused the communication problem. All working great now.

Jason
jasonsf
Senior Nut
Senior Nut
 
Posts: 60
Joined: Sun Oct 16, 2016 2:43 pm

Previous

Return to General

Who is online

Users browsing this forum: No registered users and 8 guests

cron