DSC 832 / 5010

General Discussion

DSC 832 / 5010

Postby robjae » Mon Jul 03, 2017 4:08 am

I am not able to receive anything on my AD2PI, seems to send ok. I am also only able to use address 1, which is where my current keypad is assigned. Also using smartthings, and only able to arm and disarm by going through an arm/ disarm cycle, first time arms, second time disarms, only on the disarm button push. Any help is appreciated. I checked the wire several times, seems to be fine.
robjae
newt
newt
 
Posts: 3
Joined: Tue Jun 20, 2017 5:54 am

Re: DSC 832 / 5010

Postby kevin » Mon Jul 03, 2017 9:31 pm

Please make sure you have the latest firmware from here https://www.alarmdecoder.com/wiki/index.php/Firmware

If that doesn't help please email support if you haven't
Not an employee of the company. Just here to help and keep things clean.
kevin
Platinum Nut
Platinum Nut
 
Posts: 994
Joined: Fri Aug 16, 2013 10:10 am

Re: DSC 832 / 5010

Postby robjae » Tue Jul 04, 2017 6:08 am

It was the firmware, I specified DSC when I ordered it so figured it had been updated. Thank you.
robjae
newt
newt
 
Posts: 3
Joined: Tue Jun 20, 2017 5:54 am


Return to General

Who is online

Users browsing this forum: No registered users and 2 guests

cron